Mig-15

She’s coming along well. A bit tricky the fuselage but I managed. Remember this is a printed kit which means you get sheets of balsa with printing of the parts one the sheets. Then one has to cut them out carefully by hand. This isn’t laser cutting so it takes some care.

I hope for more work on the model this week.

And now for something completely different

And now for something completely different. My next project. I have the Easy Built kit. Printed version on balsa of course. 16 inch span. I have options.

EDF on a timer(they can sometimes not end well if everything isn’t just right on the first launch. JetX. I actually have the motor and pallets from the day. The model was designed for JetX. Again this can also end unwell and has for me in the past. Or just Jetcat it. In the plans you can see the hook for Cat launch. I’m leaning to jetcat for all the obvious chicken hearted reasons. The ME-262 I made and flew was a great flyer so I’m hopeful here with a no-profile model.

Flying Field!

We have a field! The city of Carpinteria has reopened and Viola Fields to free flight and small park flyers. This site is 15 minutes from our studio. I plan to go there on Wednesdays when there are no games over park flyers present. As it is we are kinda in the middle of nowhere and the place won’t get crowded during week days.

It’s nearly 5 acres. A bit larger than the Grassy Knoll. Weather is always pretty good and it’s never really hot there in summer. Winds? I’m using Windy.com and presently in the early morning it’s 0-1kt.

Thanks to my only active member of my Squadron Gregg Goris for finding the site! Finally I can test, trim, and fly.

ME-262 flies!

Today I got the tissue printed, applied and pre-shrunk.Tomorrow all I need to do is dope it and touch up all the misalignment in the tissue.I did give it a few test glides and after I found the CG it flew very well. Better than I would have thought.At one point with a hard through it got the slight breeze and flew pretty far before settling in and making a nice landing. The green stuff on the nose is clay. I plan to replace it with Apoxie Sculpt two part epoxy that sculpts like clay and later hardens. Afterwards I can paint it to match the fuse colors.Very pleased with these plans because the plane really flies so well. Can’t wait until my catapult stick shows up from Volare Products. Looks like I’ll be good for this Sunday’s JetCat event at the Grassy Knoll!

Heaven…

This is where I want to be. This is what my hobby is all about. Why free flight and not radio control? This video Tom Hallman did is why. I bet you didn’t know rubber powered model airplanes could do this. Well now you do. This all looks easy but it is not. It takes lots of skill to build and fly a plane that has to fly itself.

Long live Free Flight!

Lots of fun stuff

Did some model airplane therapy. I have an event at the Grassy Knoll this weekend for JetCat (the Cat is for catapult) and an old timer event. Don’t worry there will only be about 6 of us, we are outdoors and all wearing masks.

Seeing how I don’t have a JetCat I thought I should make one. I got the plans online(  http://parmodels.com/home.html  ) that come with beautiful graphics-markings for this WW2 Me-262 that you print on tissue and apply to the model.

Basically you have a kind of slingshot and you put the jet in to and launch it. They fly for a pretty long time if built light enough and it’s trimmed precisely. That’s where the contest comes in. The last one down wins and a grouping of 6 flights 3 out of 6 being the best. This is all Flying Aces Club the best national club-organization for free flight model airplanes there has ever been.

Also a new model came from Volare Products, the the Square Eagle P-30 for duration flying FACE contests. We are starting to have online events were you fly and mail in (on the honor system) your results. As you build points for your flights one day you might get that actual Bluemax FAC sends you! A high honor among your peers and friends of the FAC.